Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Model Years
- Show Fewer Model Years
Hubs

$77.00
-12mm E-THRU rear hub (FH-M618)
-Durable for less maintenance cycle
-Angular contact Cup & Cone Bearing with grease sleeve
-High quality sealing
-CENTER LOCK rotor mount
-10/9/8-speed compatible

$47.99 - $70.99
Shimano XT M756 front hub.
- Double contact sealing
- Super polished bearing races for low friction rolling
- Light alloy QR lever and nut
- 6-bolt ISO disc mounting surface

$90.99
Shimano XT FH-M756 Series Rear Hub
- Double contact bearing seals
- Super polished bearing races for low friction rolling
- Light alloy QR lever and nut
- 6-Bolt rotor mount
- Bearing Type: Loose Ball
- Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed
- Center to Flange, Left: 33.5
- Center to Flange, Right: 20.5
- Flange Diameter Left: 61
- Flange Diameter Right: 61
- Hub Drilling: 32
- Hub/Brake Compatibility: 6-Bolt Disc
- Rear Axle: QR x 135mm
- Skewer Included: Yes
- Spoke Interface: J-Bend
- Weight: 495 grams

$76.99
With simple setup and reliable trail performance, the Shimano Deore XT 8100 front hub is perfect for custom MTB wheel builds.
- Easy disc brake rotor installation with Center Lock spline mount and lock ring
- Tool-less 15mm thru axle system optimizes rigidity and weight
- Simple setup and reliable trail performance
$109.99
Contact seals on hub and freehub body
Spoke Holes: 32h
Brake/Compatibility: centerlock disc (without lock ring)
Cassette/Driver: 10/11-speed road
Axle/Spacing: 12x142mm Thru Axle
Freehub body material: steel
Hubshell material: anodized aluminum
Weight: 365g.
Color: Black

$186.00 - $224.99
High quality sealed bearing hub is available in traditional and modern configurations.
- Steel axle, aluminum end caps with steel knurled contact surfaces
- Same proven driver mechanism as higher priced models
- Spoke Interface: J-Bend
- Hub/Brake Compatibility: 6-Bolt Disc
- Skewer Included: No
- Bearing Type: Sealed Cartridge

$179.99
Pro 4 Fatsno Front hub Tech Specs >
-Sealed stainless Steel cartridge bearings
-Hub shell machined from a single forged aluminium billet
-Standard 6 bolt disc fitting
-Larger spoke flange to enable stiffer wheel builds
-Unsurpassed reliability
-Available in 135, 142 and 150mm width FDS

$499.99 - $706.99
The DT Swiss 240s 6-Bolt Rear Hub hits the sweet spot between low weight and reliability. With multiple axle options, you can build up a high-end wheel for nearly any bike. DT's legendary Ratchet System ensures precise engagement and exceptional reliability, no matter how hard you stomp on the pedals. On the winning end of countless World Cups and local races in every discipline from XC to enduro to downhill, these hubs are the centerpiece for thousands of nearly frictionless rides.
$173.99
Affordable Swiss performance
6-bolt disc
Steel cartridge bearings
Refined end caps allow for easier disassembly
F/R: front
Axle/Spacing: 15x100mm Thru Axle
Brake/Compatibility: 6-Bolt disc
Hole: 28H
For J-bend spokes

$338.99
The new standard for durability and price.
- Patented Star-Ratchet system
- Contact-free seals and high precision build guarantee smooth bearings
- Press-fit end caps allow tool-free maintenance and conversion

$339.99 - $599.99
The new standard for durability and price.
- Patented Star-Ratchet system
- Contact-free seals and high precision build guarantee smooth bearings
- Press-fit end caps allow tool-free maintenance and conversion
$199.99
Upgrade your DT Swiss 180, 240, 350 or 540 hub. 6.6 degrees of engagement!
Kit includes two ratchet rings, two springs, and grease.

$291.99
Zipp's ZM2 hubset delivers dependable precision performance to the gnarliest trail.
- Engineered in Germany with better seal design for improved durability
- Compatible with e-mountain bikes
- Spoke Count: 32H
- Boost only
- 6-bolt brake interface

$546.99
Zipp's ZM2 hubset delivers dependable precision performance to the gnarliest trail. This German-engineered hubset features 12 pawls and 132 points of engagement for a quicker response. The hub's improved seal design means better durability on rough terrain. The genius of the ZM2 hub is how we achieved quicker engagement.
This hub system works with 12 pawls, in 4 groups of 3, on a 33-tooth ratchet ring. The 33 teeth make the ring strong with pickup that's reliable and consistent.
The 4 groups of 3 pawls are staggered, meaning there are always 3 pawls engaging at any time, which boosts durability. The ZM2 also has higher load transmission capability. The hub is capable of being used on electric mountain bikes.
- Engineered in Germany with better seal design for improved durability
- 132 points of engagement
- Designed with 12 pawls (4 groups of 3) for quick engagement
- Strong ratchet ring maximizes load capacity
- Compatible with e-mountain bikes
- Spoke Count: 32h
- Boost only
- 6-bolt brake interface

$546.99
In designing an upgraded hubset for our pro-proven Firecrest wheel lineup, we turned to our engineering colleagues at SRAM's development center in Schweinfurt, Germany. The result is the ZR1 hubsets for disc wheels. This hubset features better seal design for improved durability and quicker response with 66 points of engagement. Our engineers spent more than two years developing the ZR1. Proving the durability of the hubset included more than 58,500km of test riding, part of 3,222 hours of total testing. The ZR1 features key technology from Zipp's Cognition hubs. The seal design is the same as the Cognition, with a large dust cap at the base of the driver body and better bearing seals for more protection. The bearing size also is the same as the Cognition, although the Cognition uses a premium bearing. The six pawls are offset to work in two groups of three pawls. There are always three pawls engaging. This design creates a quick engagement feel, with 66 points of engagement. The driver body is designed so pawls stay in place for disassembly to make service convenient. Zipp hubs are designed to use J-bend spokes, the most popular type of spokes today. J-Bend, widely available, are easier to replace.
- Better sealing, increasing durability over previous hub model
- Quick engagement for a responsive ride
- Lightweight
- Same bearing size as premium-level Cognition hub
- e-bike certified
- Disc brake hub with Center Lock rotor interface. The lock ring is included

$54.99
Converts a Stan's 3.30/3.30Ti rear hub to a 12mm thru-axle. Compatible with both Type 1 and Type 2 rear hubs.

$31.99
Stan's 3.30HD QR Hub Kit makes Stan's 3.30HD front hubs quick-release compatible. Installation is easy—just pull the old ones off and put the new ones on.

$324.99
Shimano Alfine SG-S7001 Disc Brake Internally Geared Hub delivers an impressive gear range, spread across 8 speeds, all with the reliability and low maintenance you can only get with an internally geared hub.
- Center Lock Disc Rotor Compatible
- Rotor lockring not included
- Hub Center to Flange: 30.0mm
- Hub Drilling: 32-hole
- Flange Diameter: 92.5mm
- Drivetrain Speeds: 8
- Spoke Interface: J-Bend

$46.99
The Shimano HB-M525A hub is ideal for use with 6-bolt disc brake rotors and quick release dropouts.
- Double contact sealing
- Super polished bearing races for low friction rolling
- 6-bolt ISO disc mounting surface

$109.99
Shimano XT FH-M8010/M8000 Rear Hubs.
- Double contact bearing seals
- Super polished bearing races for low friction rolling
- Shimano Quick-engagement freehub
- Not compatible with Shimano 11-Speed Road cassettes
- Cone bearings races ground by a Cubic Boron Nitride tool for smooth-rolling durability
- Center Lock disc brakes provide reliable braking power (lockring sold separately)

$109.99
- Series : DEORE XT
- Disc Rotor Mount : Center Lock Disc
- Axle Type : 12mm thru-axle
- Axle : 12x148mm
- Contact Sealing : Labyrinth & Contact
- Spoke Holes : 32H

$131.00
Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM's 900 hubs are ready for the challenge. On the inside, their smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike.
- Fully convertible with tool-free end caps
- 24, 28 or 32 spoke holes

$326.99 - $327.00
Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM'S 900 hubs are ready for the challenge. On the inside, the smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike.
- Versatile driver body can accept ROAD or MTB drivetrain, full spline or XD cassettes
- Fully convertible with tool-free end caps
- BOOST variants
- 24, 28 or 32 spoke holes

$327.00
Whether the goal is a finish line, epic adventure or simply getting back home again, our new 900 hubs are ready for the challenge. On the inside, our smooth and durable DOUBLE TIME drive mechanism ensures rapid lightning-fast engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike.
- Includes Quick Release & 12x142mm Through AxleCaps
- Fully convertible with tool free end caps
- DOUBLE TIME mechanism offers smooth,quick and durable engagement
- Versatile driver body can accept ROAD or MTB drivetrain, full spline or XD cassettes
- Axle type: Conversion Caps included
- Spoke holes: 24
- Brake compatibility: Disc (6-bolt)
- Driver Mechanism: Double Time - Four Pawl
- Axle material: Tapered aluminum
- Driver body material: Aluminum
- Hub shell: Aluminum - Seeker angled flanges - Oversized body
Page 1 of 2
Next page