Filter By:
Tools
$20.00
Fox 5-Piece Aluminum Mounting Hardware Kit features friction reducing resin allowing the shock to respond faster.
Features:
O-rings and the flanged bushing design blocks out dirt and mud
All pieces to the hardware system can be mounted to the shock and removed by hand
8mm x 0.860"/ 21.8mm
$34.00
If you want the best, go straight to the source. These are Fox's new Low Friction seal kits — the same seals used on their premium line of "Factory Series" forks.
Great hop-up for your older Fox fork, essential for your newer Fox Fork
Inspect and clean and/or change every 125 hours of riding use or anually for maximum performance and fork longevity.
Select the kit that matches the stanchion tube size of your Fox fork
Note* - Seals do not work on older forks with "flanged" style lowers and proper seal driver tool is necessary for proper installation
$27.00
Changing volume spacers in the shock is an internal adjustment that allows you to change the amount of mid stroke and bottom out resistance.
If you have set your sag correctly and are using full travel (bottoming out) too easily, then you could install a larger spacer to increase bottom out resistance.
If you have set your sag correctly and are not using full travel, then you could install a smaller spacer to decrease bottom out resistance.
$27.00
Fox Float X/DPX2 Air Spring Volume Tuning Kit. Changing volume spacers in the shock is an internal adjustment that allows you to change the amount of mid stroke and bottom out resistance.
$47.00
Fox Dust Wiper Kit is standard equipment on Fox Forks and gives them a smooth feel.
Replacement Dust Wiper kit for Fox 40 forks.
This Kit Includes:
(2) Seals
(2) Dust Wipers
Crush Washers
Sag Ring

$27.00
FOX AIRSLEEVE REBUILD KIT
- Breathe new life into your Fox rear shock
- Maintenance info can be found at foxracingshox.com
$20.00
This seal kit is suited for the Float NA2 air spring of Fox 32 suspension forks from model year 2016.
$20.00
This seal kit is suited for the Float NA2 air spring of Fox 34 suspension forks from model year 2016.
$18.00
Similar to changing the oil in your car, servicing your suspension fork regularly will keep it running smooth and flawlessly for years to come. Not servicing your suspension can lead to lack of performance and premature wear and tear. To service your fork you'll need the proper seal kit that fits your fork.
Fox Shox Part Numbers
36mm 2015 - 2017: 803-00-58
Page 1 of 2
Next page